August 31, 2023
Lindberg/MPH, a leading manufacturer of heat treat furnaces, announced the shipment of a continuous full muffle mesh belt conveyor furnace to an industrial manufacturer.
Read More
July 28, 2023
Lindberg/MPH, a leading manufacturer of heat treat furnaces and nonferrous melting and holding equipment, announced the shipment of three (3) electrically heated, RO pit furnaces with air-cooled fans. The furnaces will be used for heat treating various steel components in a Nitrogen atmosphere.
Read More
June 19, 2023
Lindberg/MPH is pleased to announce the shipment of a rod overbend box furnace with powered load/unload table to the manufacturing industry.
Read More
May 18, 2023
Lindberg/MPH announced the shipment of an electrically heated, full muffle, mesh belt conveyor furnace. This furnace is designed for treating pressed powdered material.
Read More
February 16, 2023
Lindberg/MPH, a leading manufacturer of heat treat furnaces and nonferrous melting and holding equipment, announced the shipment of an electrically heated, steam atmosphere pit furnace for steam treating parts.
Read More
November 11, 2022
Lindberg/MPH is pleased to announce the shipment of a gas fired cyclone box furnace to the manufacturing industry. This heat treat furnace has a maximum temperature rating of 1,250°F and a load capacity of 6,000 lbs.
Read More
July 07, 2022
Lindberg/MPH announced the shipment of one gas-fired Exothermic atmosphere generator to the manufacturing industry. This exothermic generator features an energy efficient design that provides reliable and economic operation.
Read More
May 24, 2022
Lindberg/MPH announced the shipment of one gas-fired cyclone pit furnace to the manufacturing industry.
This furnace has a maximum operating temperature of 1400°F and a gross load capacity of 2,750 lbs.
Read More
February 21, 2022
Lindberg/MPH announced the shipment of two electrically heated nitrogen pit furnaces to the manufacturing industry. These furnaces are configured for process applications requiring a maximum furnace temperature of 1250°F in a nitrogen atmosphere.
Read More
July 28, 2021
Lindberg/MPH announced the shipment of one electrically heated mesh belt conveyor furnace to the manufacturing industry. This furnace is configured for process applications requiring a hydrogen process atmosphere in the heating section muffle.
Read More
May 27, 2021
Lindberg/MPH announced the shipment of one electrically heated spray washer to the defense industry. This spray washer is designed as a companion to a heat-treating process, washing the parts prior to and/or after heat treating.
Read More
May 19, 2021
Lindberg/MPH has an electrically heated atmosphere pit furnace with retort and fan in stock that is available for immediate shipment. This pit furnace delivers high efficiency in single and multiple zone heating. A motor driven fan recirculates protective gases through the retort.
Read More
May 19, 2021
Lindberg/MPH has an 1100°C large Chamber utility box furnace in stock that is available for immediate shipment. The utility box furnace provides flexible, efficient performance in a variety of heat-treating applications. The insulation and heating elements maintain uniform heat distribution and a vertical lift door provides easy access.
Read More
February 24, 2021
Lindberg/MPH announced the shipment of two gas-fired hardening and tempering furnaces to the manufacturing industry. These large-capacity box furnaces will be used for the normalizing, austenitizing, and tempering of forged components. The outer shell sidewalls and floor are constructed from 3/16” steel plate. The lining is ceramic fiber modules that store low amounts of heat and have superior insulating qualities, giving maximum fuel efficiency to the customer.
Read More
July 17, 2020
Lindberg/MPH announced the shipment of an electric atmosphere continuous mesh belt conveyor furnace to a microelectronics manufacturer in the United States. This continuous belt conveyor furnace is configured for process applications requiring a nitrogen/hydrogen blend process atmosphere in the heating section muffle at process temperatures up to 1000°C.
Read More
May 29, 2020
Lindberg/MPH announced the shipment of a Mesh Belt Conveyor furnace to the electrical and electronic manufacturing industry. This furnace is electrically heated, has an argon process atmosphere, and a full muffle design.
Read More
March 17, 2020
TPS is closely monitoring developments with respect to COVID-19, including information and guidance published by healthcare authorities around the globe. We are closely monitoring the guidance from State and Federal government offices as well from the Centers for Disease Control (CDC) for the entire United States and specifically in all of the locations where we currently manufacture and service our products. Additionally, we are also staying updated on conditions for our global locations as well.
Read More
February 07, 2020
Lindberg/MPH announced the shipment of a gas fired nitriding pit furnace with built-in retort to the welding industry. This pit furnace is designed for single and two stage nitriding processes and post-oxidation applications.
Read More
January 21, 2020
Lindberg/MPH announced the shipment of an Electrically Heated Homocarb Pit Furnace to a manufacturer in the power industry.
Read More
December 19, 2019
Lindberg/MPH announced the shipment of two Electrically Heated Atmosphere Pit Furnaces the automotive industry. The nitrogen atmosphere pit furnaces will be used for heat treating automotive parts.
Read More
November 11, 2019
Lindberg/MPH announced the shipment of a Gas Fired Aluminum Stack Melting and Holding Furnace to the secondary smelting industry. This stack-type central melting furnace will be utilized to produce aluminum ingot and sows. The furnace has a melt rate of 4,500 pounds per hour.
Read More
October 07, 2019
This year Lindberg/MPH is excited to announce their participation in the 30th annual ASM Heat Treating Society Conference and Exposition. Along with hundreds of other industry leaders, and innovators, Lindberg/MPH will feature their heat treat furnaces and non-ferrous melting and holding equipment.
Read More
September 25, 2019
This year the NADCA (North American Die Casting Association), will be hosting this congress and tabletop from October 1st - 3rd 2019 in Cleveland, Ohio. They host this event annually to promote the growth and development of the die casting industry within the global marketplace. Lindberg/MPH is excited to share their knowledge in booth #414.
Read More
September 09, 2019
Lindberg/MPH is proud to announce their participation in this year’s Aluminum USA Show. This event will take place from September 12th- 13th 2019 in Nashville, TN.
Read More
August 19, 2019
Lindberg/MPH supplied an integrated three chamber furnace to a hot stamping company in Grand Rapids, MI. The unique stacked design of this furnace offers a significantly smaller footprint compared to a continuous system. A recent video of the installed furnace shows the integration with a robotic transfer system and a hydraulic press.
Read More
August 12, 2019
Lindberg/MPH has a brand new electrically heated atmosphere box furnace with a semi-automatic powered load/unload transfer table and oil quench tank in stock. This box furnace can be used for applications that require process temperatures up to 1,850°F under a N2/H2 blended atmosphere (96/4 blend).
Read More
July 31, 2019
Lindberg/MPH announced the shipment of an Electrically Heated Four Chamber Hot Stamping Furnace to the Gestamp Research and Development facility located in Auburn Hills, MI. Gestamp is an international corporation that designs, develops, and manufactures metal automotive components.
Read More
May 17, 2019
LindbergMPH, located in Riverside, MI, announced today they will be supplying a 120,000 lb. reverberatory melting furnace to a large automotive casting supplier
Read More
April 09, 2019
Lindberg/MPH announced the shipment of a 1100°C Crucible Furnace to a research and development laboratory in the nuclear industry. This crucible furnace will be used for a wide variety of laboratory melting applications, including annealing, ashing, carbon firing, ceramic firing, hardening, melting, nitriding, normalizing, sintering, solution treating, and stress relieving.
Read More
March 18, 2019
Lindberg/MPH announced the shipment of an Aluminum Melting and Holding Furnace. The melting and holding furnace was designed with an aluminum melt rate of 3,000 lbs per hour and the capacity to hold up to 40,000 lbs of aluminum.
Read More
March 14, 2019
Lindberg/MPH announced the shipment of a 1200°C Crucible Furnace to a company in the energy industry. The crucible furnace may be used for a number of applications and processes, including annealing, ashing, carbon firing, ceramic firing, hardening, melting, metallizing, normalizing, sintering, solution treating, and stress relieving.
Read More
February 19, 2019
Lindberg/MPH announced the shipment of one (1) Single-Zone Tube Furnace to an engineering company in the nuclear power industry.
Read More
February 15, 2019
Lindberg/MPH announced the shipment of one (1) Treet-All™ Box Furnace to a global battery manufacturing company based out of Japan. The maximum temperature rating of this light industrial box furnace is 2050°F and has work chamber dimensions of 18” wide x 36” deep x 18” high.
Read More
January 31, 2019
Lindberg/MPH announced the shipment of one (1) Treet-All™ Box Furnace to the technology industry. The Treet-All™ Light Industrial Box Furnace is suited for multiple applications, including annealing, ashing, austempering, brazing, preheating, and solution treating.
Read More
January 22, 2019
Lindberg/MPH announced the shipment of one (1) Temperite™ Box Furnace and one (1) Treet-All™ Box Furnace to work in tandem. The Temperite™ Box Furnace is configured for aging, annealing, austempering, baking, solution treating, and tempering applications, while the Treet-All™ Box Furnace is configured for annealing, ashing, austempering, brazing, preheating, and solution treating applications.
Read More
December 21, 2018
2018 was yet another busy year for Lindberg/MPH. Throughout the year, they shipped a total of 130 units to companies in industries such as automotive, aerospace, foundry, electronics, R&D, oil & gas, and technology.
Read More
October 09, 2018
Lindberg/MPH announced the shipment of one (1) continuous mesh belt conveyor furnace to the computer market. This conveyor furnace is configured for soldering process applications and provides a heating and cooling process environment under a nitrogen/hydrogen blended atmosphere.
Read More
September 28, 2018
The NADCA (North American Die Casting Association), which promotes the growth and development of the die casting industry in the global marketplace is hosting the Die Casting Congress & Tabletop show from October 15th-17th in Indianapolis, Indiana and Lindberg/MPH is proud to be exhibiting in booth 1122.
Read More
September 25, 2018
The Metal Treating Institute and its media partner Industrial Heating Magazine have organized the 2018 Furnaces North America (FNA) show that will be taking place in Indianapolis, Indiana October 8th-10th.
Read More
May 23, 2018
Lindberg/MPH announced the shipment of a gas fired aluminum stack melting and holding furnace to a manufacturer of recreational vehicles. The equipment provides additional melting capacity and efficiency for a new die casting machine installation.
Read More
May 18, 2018
Community involvement has always been a top priority for Lindberg/MPH and this is another way for the company to show it’s Michigan pride.
Read More
May 09, 2018
Lindberg/MPH announced the shipment of a box furnace with retort to a laboratory in Canada. The box furnace will be used to test parts in a hydrogen atmosphere.
Read More
April 26, 2018
Lindberg/MPH announced the shipment of three (3) natural gas fired box furnaces to a parts manufacturer for the oil and gas industry. The box furnaces will be used to develop process control requirements for heat-treating and stress relieving of underground mining/drill heads.
Read More
April 16, 2018
Lindberg/MPH announced the shipment of an electrically heated rod overbend atmosphere box furnace to the aerospace industry. The box furnace will perform a heat treatment on parts within the work chamber under a reducing atmosphere generated from a nitrogen methanol panel.
Read More
March 19, 2018
United Way of Southwest Michigan just celebrated their 75th anniversary of serving Berrien and Cass counties with a banquet to acknowledge and applaud all the companies who raised funds in support of our community. The 2017 United Way Annual Campaign raised a record-breaking amount of $4,261,541, which surpassed 2016’s total of $4.1 million and Lindberg/MPH was proud to have not only been a contributor in this campaign but also an award winner.
Read More
March 12, 2018
Lindberg/MPH announced the shipment of an electrically heated cyclone pit furnace to a steel heat treater. This is a repeat customer for Lindberg/MPH and the pit furnace will replace an existing Lindberg furnace at their facility.
Read More
March 07, 2018
Lindberg/MPH has experienced continued growth year after year and 2017 was no exception. With company growth comes new job opportunities for a variety of positions.
Read More
January 30, 2018
Lindberg/MPH announced the shipment of a three-zone tube furnace to an American University. The tube furnace is ideal for annealing, ashing, carbon and ceramic firing, drying, hardening, sintering, solution treating, stress relieving, and normalizing applications.
Read More
December 15, 2017
Lindberg/MPH has experienced steady growth year after year and 2017 was no exception with another year of great performance. At the beginning of the year, Lindberg/MPH invested in the future by purchasing an Emrak Press Brake and Hydraulic Swing Beam Shear to maximize their production capabilities.
Read More
December 06, 2017
Lindberg/MPH announced the shipment of an electrically heated hot stamping furnace to an automotive supplier. This multiple chamber furnace system will be used to preheat steel blanks to be used for hot stamping structural automotive components.
Read More
November 13, 2017
Lindberg/MPH announced the shipment of an electrically heated, steam atmosphere, pit furnace with a steam generator for steam treating tools steels. Steam treating produces an oxide film on the surface of the part which improves wear and corrosion resistance, and provides a uniform blue-black finish
Read More
November 09, 2017
Lindberg/MPH announced the shipment of a 1200°C single zone tube furnace to a manufacturer of electronic components. The 1200°C tube furnace offers exceptional radial and linear temperature uniformity, process repeatability, rapid heat-up and response, and requires minimal maintenance.
Read More
October 30, 2017
Lindberg/MPH announced the shipment of two electrically heated Pacemaker integral quench furnaces. The Pacemaker IQ furnaces will be used for carburizing and hardening applications.
Read More
October 13, 2017
Lindberg/MPH announced the shipment of a 1500°C heavy duty box furnace to a University. The 1500°C box furnace offers excellent temperature uniformity, rapid response rate, dense load capability, and process repeatability which makes it ideal for testing, research and development, and laboratory applications.
Read More
September 29, 2017
Lindberg/MPH announced the shipment is 1200°C hinged, 3 zone, tube furnace. This tube furnace is designed for horizontal use and can be used with a variety of customer supplied ceramic, quartz, or alloy process tubes or retorts.
Read More
August 24, 2017
Lindberg/MPH announced the shipment of a gas-fired immersion lead melting furnace to a repeat customer in the battery industry. The melting and holding furnace will be used in the production of lead plates for automotive batteries.
Read More
August 10, 2017
Lindberg/MPH announced the shipment of a Temperite® box furnace and a Treet-All box furnace to the Maritime industry. The box furnaces are designed to be used in a stacked configuration or stand alone.
Read More
July 26, 2017
Lindberg/MPH announced the shipment of an electrically heated, rod over-bend atmosphere box furnace to the steel and mining industry. This is the second heat treating furnace of this kind that the customer has ordered from Lindberg/MPH. It is designed to meet the customer’s specific process based on the previous existing model they had ordered.
Read More
July 11, 2017
Lindberg/MPH announced the shipment of a gas fired cyclone box furnace to the heat treat industry. The box furnace will be used for heat treating steel parts and is the second Lindberg/MPH furnace that has been purchased by this customer.
Read More
June 26, 2017
Lindberg/MPH announced the shipment of a pair of custom 500°C Tube Furnaces to be used in a healthcare laboratory application.
Read More
June 15, 2017
Lindberg/MPH announced the shipment of an electrically heated, large chamber utility box furnace to an automotive supplier. The furnace will be used for batch testing aluminum castings on a daily basis at a temperature of 500°C.
Read More
May 26, 2017
Lindberg/MPH announced the shipment of a Heavy Duty Box Furnace to a global provider of material and technology solutions. This box furnace will be used for processing glass.
Read More
May 16, 2017
Lindberg/MPH announced the shipment of an electrically heated hand-tilting aluminum melting furnace to the sand casting industry. The furnace will be used as a central breakdown for transfer via bull ladle.
Read More
May 02, 2017
Lindberg/MPH has an air atmosphere box furnace in stock that is available for immediate shipment. The atmosphere box furnace provides flexible, efficient performance in a variety of heat treating applications along with simple economical operation.
Read More
April 28, 2017
Lindberg/MPH announced the shipment of a Treet-All box furnace to supplier of sealing products. The Treet-All box furnace is modular, stackable, and space-saving.
Read More
April 20, 2017
Lindberg/MPH announced the shipment of an aluminum central melting furnace to the die casting industry. This equipment holds 62,000 lbs. of aluminum and has a melt rate of 6,000 lbs. per hour.
Read More
April 05, 2017
Lindberg/MPH has received a purchase order from Temp-Rite Steel Treating in Harrison Township, MI. The order is for a large capacity production box type furnace.
Read More
March 30, 2017
Lindberg/MPH announced the shipment of a 1200°C Tube Furnace for a laboratory application. The “Mini-Mite” furnace has a wide temperature range of 500°C to 1200°C.
Read More
March 28, 2017
Lindberg/MPH announced the shipment of a gas fired melting and holding furnace. The furnace incorporates seven (7) immersion tubes, each with its own burner and ratio regulator control.
Read More
February 16, 2017
Lindberg/MPH announced the shipment of two eighteen tube gas fired immersion tube lead melting and holding furnaces to a supplier of the battery industry. The immersion tube furnaces will be used in the production of lead plates for automotive batteries.
Read More
February 01, 2017
Lindberg/MPH was founded in 1912. With more than 100 years of service and over 75,000 installations worldwide in the heat treating/non-ferrous melting industry, they are considered an expert in the field of heat processing and custom engineered equipment and systems.
Read More
January 23, 2017
Lindberg/MPH announced the shipment of an aluminum central melting, tilting reverberatory furnace to an die cast supplier of the transportation, industrial, and leisure markets.
Read More
January 10, 2017
Lindberg/MPH announced the shipment of an atmosphere box furnace for research and development purposes.
Read More
December 16, 2016
During the signing the Lindberg/MPH team donned the United Way of Southwest Michigan (UWSM) colors and signed the United Way jersey.
Read More
December 02, 2016
We are pleased to announce Bill St. Thomas has rejoined Lindberg/MPH as Business Development Manager. Bill began his career in the heat treat industry with Lindberg and brings 40 years of experience relative to custom designed heat treating furnace systems.
Read More
November 21, 2016
Lindberg/MPH announced the shipment of a gas fired aluminum stack melting and holding furnace to a manufacturer of recreational vehicles. The equipment provides efficient melting and holding of aluminum for a new die casting machine installation as part of a fully automated cell.
Read More
November 08, 2016
This heat treat furnace system performs a two-stage nitriding process to achieve high surface hardness of the steel parts.
Read More
October 26, 2016
Lindberg/MPH announced the shipment of an 85’ long electric resistance heated aluminum launder system to a leader in aluminum die casting.
Read More
October 11, 2016
The Treet-All™ Light Industrial Box Furnace was supplied with a programmable temperature controller and is ideal for heat treating small batches of parts.
Read More
September 27, 2016
The crucible furnace will be used for melting aluminum alloys in a laboratory setting for research and development.
Read More
September 19, 2016
The tube furnaces are easy to operate, utilize an energy efficient design, and provide rapid heat-up rates along with fast cooling and response time.
Read More
August 04, 2016
The immersion heat allows for efficient and economical melting and holding of the lead while providing the precise temperature control required for the customer’s casting process.
Read More
June 03, 2016
The Pacemaker® furnace provides a total solution for the customer’s heat treating process.
Read More
May 16, 2016
The cyclone design provides optimum heat distribution and exceptional temperature uniformity.
Read More
April 20, 2016
They will be used for melting and holding Kirksite, an alloy of Aluminum and Zinc.
Read More
April 19, 2016
It performs a steam treating process on tool steels. Steam treating produces an oxide film on the surface of the part which improves wear resistance, improves corrosion resistance, and provides a uniform blue-black finish.
Read More
February 17, 2016
The equipment provided includes three electric immersion aluminum holding furnaces used to keep aluminum at die casting temperature.
Read More
February 16, 2016
It can be used for a variety of applications including annealing, aging, carbon firing, ceramic firing, hardening, sintering, brazing, preheating, solution treating, and stress relieving.
Read More
January 12, 2016
Each piece of the heat treat equipment was built with plate construction and structural steel members suitable for an industrial environment.
Read More
January 04, 2016
The system will increase melt rate, enhance safety, and improve efficiency with state of the art process control.
Read More
November 09, 2015
The furnace will maintain aluminum at the required temperature for die casting.
Read More
October 27, 2015
The flow through design provides the customer with an efficient load/unload operation.
Read More
October 08, 2015
The industrial furnace shell is ruggedly reinforced with steel members to form boxed sections sufficient for a die casting facility environment.
Read More
September 22, 2015
The modifications to the electric immersion furnace increased the furnace’s aluminum holding capacity.
Read More
September 17, 2015
It performs a steam treating process on tool steel with a maximum gross workload of 1,920 lbs.
Read More
June 22, 2015
The system performs a two stage nitriding process to achieve high surface hardness on A11 and H13 steel parts.
Read More
June 22, 2015
The electrically powered furnaces utilize two heating systems; an auxiliary preheater and an air recirculation system to achieve uniform temperature at low temperatures, as well as radiant heating elements for uniform high temperature operation.
Read More