Lindberg/MPH Ships Immersion Lead Melting Furnace to a Manufacturer of Automotive Batteries

lead melting furnaceLindberg/MPH announced the shipment of a gas-fired immersion lead melting furnace to a repeat customer in the battery industry. The melting and holding furnace will be used in the production of lead plates for automotive batteries.

The melting furnace is designed with nine immersion tubes, each with its own burner, boasting over 28,000 square inches of heat transfer area. This immersion furnace design provides efficient heating of the metal without super heating which prevents metal losses.

The maximum temperature rating of this melting furnace is 900°F. The furnace has a melt rate of 21,000 lbs. per hour, a holding capacity of 121,000 lbs. of molten lead and a maximum input of 3,000,000 Btu/hour. The bath features an extra-long 22” bath extension with an 18” wide front well. This tube furnace design is CE certified for use on 380/3/50 current for the end user.

“At Lindberg/MPH we work with our customers to offer the most effective and efficient solution to their application. This tube furnace uses immersion heat which allows for efficient and economical melting and holding of the lead along with the precise temperature control that is required for the customer’s casting process.”– Andrew Paul, Sales Representative

Unique features of this Lindberg/MPH immersion tube furnaces include:

  • Individually operable spark ignited burners with flame rod flame safety
  • Each burner has its own gas/air ration regulator assuring the correct air and gas mixture for dependable ignition and efficient combustion
  • On-off firing allows for a wide input range virtually eliminating temperature creep
  • The sow cradle protects the immersion tubes from possible damage from charging of large and heavy lead hogs
  • Optional well extensions
  • The hog ramp feeding onto the sow cradle allows for automatic loading of lead hogs and gently slides the pigs into the bath
  • The extended well at the front of the furnace was designed into the furnace specifically to provide the necessary space for the customer’s casting process equipment
  • Forced air cooling of the rear splash shield support and the front tube hold down structure eliminates heat distortion of the support structural.

This immersion tube furnace was completely factory assembled, pre-wired, piped and tested prior to shipment. #226238