| |
|
Specifications
Tenney Temperature / Humidity Cycling Chambers <<Go
Back
|
|
|
|
Classic Tenney Series
10, 20, and 30 cubic foot
models
Overall dimensions in inches(mm) for the 10, 20, and 30 cubic foot
models:
| Model |
Non-
humidified |
T10S |
T10C |
T20S1.5 |
T20C-3 |
T20C-4 |
T30S |
T30C |
| Humidified |
T10RS |
T10RC |
T20RS1.5 |
T20RC-3 |
T20RC-4 |
T30RS |
T30RC |
| Workspace |
W |
24(610) |
30(762) |
36(914) |
| D |
27(686) |
32(813) |
40(1016) |
| H |
28(711) |
36(914) |
36(914) |
| Exterior |
W |
30(762) |
41(1041) |
46(1168) |
| D |
47(1194) |
55(1397) |
64(1625) |
| H |
74(1880) |
84(2134) |
84(2134) |
Temperature & Humidity |
| Low |
C |
-40 |
-73 |
-40 |
-73 |
-73 |
-40 |
-73 |
| High |
C |
+200 |
+200 |
+200 |
+200 |
+200 |
+200 |
+200 |
| Change Rates in Minutes |
Time starting at Ambient to listed temperature. Based on empty chamber. |
200° |
30 |
30 |
60 |
60 |
60 |
70 |
70 |
150° |
20 |
20 |
40 |
40 |
40 |
50 |
50 |
93° |
15 |
15 |
25 |
25 |
25 |
25 |
25 |
65° |
10 |
10 |
15 |
15 |
15 |
15 |
15 |
0° |
10 |
5 |
40 |
10 |
5 |
40 |
10 |
-18° |
20 |
10 |
60 |
15 |
10 |
60 |
15 |
-40° |
60 |
20 |
90 |
30 |
20 |
90 |
25 |
-54° |
— |
25 |
— |
40 |
25 |
— |
35 |
-65° |
— |
35 |
— |
50 |
35 |
— |
50 |
| Live Load Capacity in Watts (Humidity System Off) |
Temperature °C |
+10° |
600 |
1275 |
600 |
1200 |
1800 |
600 |
1600 |
| -18° |
450 |
1000 |
450 |
1000 |
1500 |
500 |
1400 |
| -40° |
100 |
850 |
100 |
850 |
1275 |
250 |
1200 |
| -54° |
— |
600 |
— |
700 |
1050 |
— |
1000 |
| -65° |
— |
400 |
— |
500 |
750 |
— |
700 |
| Utilities, etc |
| Refrigeration |
(1)1.5HP |
(2)1.5HP |
(1) 1.5HP |
(2) 1.5HP |
(2) 2HP |
(1) 2HP |
(2) 2HP |
| Heater Capacity |
2.5 KW |
2.5 KW (3 KW If 208 Option) |
| Humidifier |
KW |
1 KW |
2 KW |
| |
GPH |
.5 |
1.0 |
| AMPS @ 230V. 1 |
28 |
30 |
32 |
34 |
35 |
34 |
35 |
| AMPS Fuse |
35 |
40 |
45 |
| Unit Weight |
LBS. |
850 |
950 |
1250 |
1350 |
1400 |
1500 |
1500 |
Humidity capability: 20% to 98% RH in the
dry bulb range of +20C or +85C as limited by a 3 dew point. Test data
based on 24C ambient, sea level, 60 Hz. On 50 Hz or higher than 24C, ambient
performance may be reduced. Consult factory regarding any special cooling
requirements.
40 and 64
cubic foot models
Overall dimensions in inches (mm) for the 40 and 64
cubic foot models:
| Model |
Non-
humidified |
T40S-2 |
T40C-4 |
T40C-6 |
T64S-7.5 |
T64C-6 |
T64C-15 |
| Humidified |
T40RS-2 |
T40RC-4 |
T40RC-6 |
T64RS-7.5 |
T64RC-6 |
T64RC-15 |
| Workspace |
W |
40(1016) |
48(1219) |
| D |
44(1118) |
48(1219) |
| H |
40(1016) |
48(1219) |
| Exterior |
W |
66(1676) |
72(1829) |
| D |
73.5(1867) |
81.5(2070) |
| H |
80.25(2038) |
91(2311) |
| Temperature & Humidity |
| Low |
Cº |
-40 |
-73 |
-73 |
-40 |
-73 |
-73 |
| High |
Cº |
+200 |
+200 |
+200 |
+200 |
+200 |
+200 |
| Change Rates in Minutes |
Time starting at Ambient to listed temperature. Based on empty chamber. |
200° |
35 |
45 |
150° |
25 |
30 |
93° |
10 |
15 |
65° |
5 |
10 |
0° |
5 |
5 |
-18° |
20 |
— |
— |
10 |
10 |
— |
-40° |
120 |
— |
— |
25 |
30 |
— |
-54° |
— |
45 |
40 |
— |
45 |
20 |
-65° |
— |
60 |
50 |
— |
65 |
35 |
| Live Load Capacity in Watts (Humidity System Off) |
Temperature °C |
+10° |
|
|
|
|
|
|
| -18° |
1000 |
— |
— |
4500 |
— |
— |
| -40° |
100 |
— |
— |
1000 |
— |
— |
| -54° |
— |
1200 |
2000 |
— |
1200 |
4000 |
| -65° |
— |
900 |
1500 |
— |
800 |
2500 |
| Utilities, etc |
| Refrigeration |
(1)
2 HP |
(2)
2 HP |
(2)
3 HP |
(1)
7.5 HP |
(2)
3 HP |
(2)
7.5 HP |
| Heater
Capacity |
6 |
6 |
6 |
8 |
8 |
8 |
| Humidifier |
KW |
2 |
2 |
2 |
2 |
2 |
2 |
| |
GPH |
1.0 |
1.0 |
1.0 |
1.0 |
1.0 |
1.0 |
| AMPS |
230V. 1 |
230V.
1 |
230V.
1 |
230V.
1 |
230V.
1 |
230V.
1 |
| S
& C |
RC
& RS |
41 |
50 |
50 |
50 |
38 |
46 |
71 |
80 |
57 |
65 |
71 |
80 |
| Fuse |
50 |
60 |
60 |
60 |
60 |
70 |
100 |
110 |
70 |
80 |
100 |
110 |
| Unit
Weight |
LBS. |
2740 |
3540 |
Standard Features at a Glance:
S = Standard on all models
H = Units with humidity
T = Temperature only units
Proprietary VersaTenn control system |
H |
Tenney VaporFlo® humidity system |
H |
Vapor tight interior made of 100% stainless steel |
S |
Non-settling, asbestos-free insulation |
S |
Control tolerance of ±0.3°C and ±2% RH typical
after stabilization |
S |
Platinum RTD temperature sensor |
S |
Humidity sensor which requires no wet wick
or water supply |
S |
Semihermetic refrigeration system |
S |
Low mass nichrome, open wire heating system |
S |
NEC wiring compliance |
S |
Vertical-down recirculating conditioning system |
S |
Double silicon gaskets on doors |
S |
Automatic defrost for door gaskets |
S |
3" Phenolic casters |
S |
Watlow F4 controller |
T |
Options:
| |
10, 20, 30 ft3 |
| |
40 & 64 ft3 |
A = Available Option
IEEE interface |
A |
A |
LinkTenn software for Windows®95 that permits
your computer to control up to 10 chambers |
A |
A |
RS422, 423, 232 or 485 interface assemblies |
A |
A |
6-event relay board @ 1 amp each |
A |
A |
Water demineralizer |
A |
A |
Water reservoir for humidity system (5 gallon) |
A |
A |
Recirculating system for humidity water |
A |
A |
Viewing window, thermally insulated and heated |
A |
A |
Interior lighting |
A |
A |
Shelving, adjustable and removable |
A |
A |
Water-cooled refrigeration system |
A |
A |
Alternate power supply wiring |
A |
A |
Automatic CO2 or LN2 cooling boost system |
A |
A |
Additional ports, gloves, etc. |
A |
A |
Rubber tire casters: 5" or 6" (3" steel are standard) |
A |
A |
Thermocouple or electrical feed through terminals |
A |
A |
Special connectors |
A |
A |
GN2 purge system |
A |
A |
Refrigeration taps and pressure gauges |
A |
A |
Remote console for instrumentation |
A |
A |
Recording instruments |
A |
A |
Redundant thermal protection and alarm system |
A |
A |
External dryer for obtaining humidity as low as 5% (to 20°C) |
A |
A |
Air cooled refrigeration system |
A |
A |
Alternate refrigeration and/or heating systems
for faster temperature change rates or increased
product load handling capabilities. |
|
A |
|
|
|
